AIM X85MXUTV001 MX UTV GPS Digital Dash with Belt Sensor

Peça#: X85MXUTV001
Please note! Product images are for illustrative purposes only and may differ from the actual product
Aim MX UTV GPS Digital Dash with Belt Sensor is a gauge designed for being installed on an UTV vehicle. It samples and shows:
channels coming from the vehicle ECU
one temperature value that can be belt or, according to the ECU of your vehicle, oil temperature or oil pressure.
lap time, with the precision of 1/100 sec and all parameters coming from GPS and Glonass constellations: speed, position, lateral acceleration and time of the day.
The GPS receiver has been tuned for our sport and can thereby stand all lateral and longitudinal accelerations, direction changes and vibrations without problems, always giving a perfect result ten times per second (10 Hz). The MX UTV uses both GPS and Glonass data to compute lap times. In case the track in which you are racing is included in the MX UTV database, it automatically recognizes it, gets the start/finish line and calculates lap times with high precision.
All these data are stored in a huge 4GB internal memory, that can record your data for thousands of hours. You can download the data recorded on your PC using
MX UTV is Powered by the Vehicle Battery
Your MX UTV can only be powered by the vehicle battery and is to be installed using the four silent blocks already mounted rear of it.
You can connect it via CAN Bus to:
SmartyCam HD
LCU-One CAN Lambda controller
Wide LCD Display
The wide LCD display has a freely configurable RGB backlight and a light sensor (1) that automatically switches on the back light with low light conditions.
The two RGB alarm LEDs (2) can be switched on with seven different colours, different blinking patterns and custom temperatures thresholds.
Five configurable shift lights (3) help you choosing the best up-shift moment. A very helpful alternative is to use them to indicate the real-time gap between the current lap and the best lap of the session.
MX UTV Back Light Control and Colour
You can set the back light as “ON”, “OFF” or “AUTO”. In this last case the light sensor placed left on the front of your MX UTV switches on/off the backlight according to the ambient light level. In this page you can also change the back light colour choosing among eight different colours.


Discussão 0